Easy Industrial Wooden Store Display

Sam and I have been having fun getting our shop set up at our Zest studio, to show off all the beautiful products from the local makers that we are so proud of! In this journey, we have scoured the internet for ideas and inspiration for merchandising display, and have discovered that the inspo is in short supply. So, we figured that we would start sharing our projects and ideas on the blog…in hopes of helping other retailers on their journey. Obviously, not all of you are retailers, but a ton of the projects that we will be rolling out over the next couple of weeks would look stellar in your home, as well. So, read on, my friend…it might just be up your alley!
The first little project is a four tiered wooden stand. The simplicity of the design lets whatever you are displaying take the spotlight. I love the industrial feel and warmth of the wood. It would even make a killer candle holder. The best part? It’s stupid easy to make!

Supplies
1 piece of 4″ X 4″ lumber (mine was pine)
chop saw
sander
wood stain (optional)
wood glue
drill (optional)
1/4″ wood dowels (optional)

Cut List
10″ piece of 4″ X 4″
8″ piece of 4″ X 4″
6″ piece of 4″ X 4″
4″ piece of 4″ X 4″

Depending on your saw, you may have to flip your board over and cut through both sides in order to cut all the way through. Obviously, you can make your posts any height, but I like the 2″ differences that are created by the above cut list.

Once you sand the posts smooth enough to your liking, feel free to stain and/or seal your wood. This is completely a stylistic choice. Our shop has a lot of dark walnut, so we wanted them to blend. However, these would look gorgeous kept as a blond pine and simply finished with a clear coat. Just make sure to follow package directions.

Here is where the optional comes in! I made several of these stands, and made them both ways with great success. If you are concerned about sturdiness, you can do like above and measure out a location to drill a 1/4″ hole in two spots on your wood. I did this so that I could use 1/4″ wooden dowels to really add strength when holding my project together.

It is kind of like adult Legos. Just fit the pieces together and secure while they dry. However, since I am a big believer in Gorilla wood glue and it’s strength, I went ahead and bypassed this step with some of my other wooden displays. Instead, I simply used wood glue on the posts and secured them while they dried with some rubber bands. Super high tech!

As you can see, I rotated the heights of my four posts around to make a fun stair-step design. I love how it shows off our cute little ceramic salt cellars, but I could see this making a fun display in the home or garden, as well. Have fun playing!
xoxo
Chanda

Comments 1

  1. Pingback: Geometric Necklace Display | Zest it Up

Leave a Reply

Your email address will not be published. Required fields are marked *